Electro galvanized welded wire mesh is made of high quality low carbon steel wire through automatic digital controlled welding equipments. It is welded with plain steel wire, then electric galvanized after welding. The finished products are level and flat with sturdy structure, it has beautiful appearance.
...

Hot dip galvanized welded wire mesh is made of high quality low carbon steel wire through automatic digital controlled welding equipments. It is welded with plain steel wire, then hot dipped galvanizing after welding. The finished products are level and flat with sturdy structure, it has well erosion-resisting and rustproof properties.
...

Mesh,also called mesh count, is the number of openings in a linear inch measured from the center of one wire to a point one inch distant. To determine the mesh, count the number of openings from the center of any one wire to the center of a parallel wire one inch away.
...

Welded wire mesh typically has larger openings than woven wire mesh. With the wire strands welded at each intersection, welded wire mesh is more cabable of maintaining its shape when stressed.
...

Woven mesh is produced by the process of weaving, that is, by passing wires alternately over and under each other.

Welded mesh is a grid formed of wires that are fused together at their junctions. It is produced on automatic welding looms by accurately positioning the short (weft) wires over the long (warp) wires and spot welding their intersections (not over and under, as in ordinary weaving).
...

www.steellong.cn

D: wire diameter(mm) mesh: opening number per. inch
L: length(m) W: wigth(m)
all weight are in units of kilograms

1. wire
W= D X D X 0.01234 X L / 2

2. welded wire mesh
...

6x6 W1.4/1.4 is a designated mesh size. The "6x6" is the horizontal and vertical spacing of the strands in inches. This is the size of the squares of space bounded by the wire strands in the mesh (the equivalent in metric is in millimeters and so 6x6 inches is 152 x 152 mm). The "1.4/1.4" is the "W" number. This is the wire size (longitudinal/transverse) in cross sectional area measured in 1/100's of a square inch (1.4 hundredths of a square inch).
...

1.Check for underground utilities. This is important before you start digging holes for the fence posts because power, fiber-optic or other cables may be present around the area of your fence.
...

State Highway Wire Mesh Fence for the installation there is no true unity of the relevant standards, highways and urban expressways should install the appropriate fencing wire mesh products, the urban landscape as the road sub-Ann Road, buds can be, three meters above the ground should be installed on the highway Highway field network, installed above the street-level highway shoots son, fill a section of the general barriers to the placement of products....

Stainless Steel Square Wire Mesh is classified into two types according to weaving patterns:

Stainless steel square wire mesh plain woven
Stainless steel square wire mesh twill woven
...