Mesh Per Inch: 1

Wire Diameter: 0.0470

The two basic metal types: Alloy Type 304 and Type 316

T304 is the basic stainless alloy, and unless otherwise specified it is assumed that this type is acceptable. Also called 18-8 due to 18% chromium and 8% nickel. T304 melts at 2600 degrees F (1430 C) but its maximum recommended temperature for continuous service is 1450 degrees F. (790 C) and is useful for intermediate service up to 1650 degrees F (900 C). Its' uses include: sorting and screening of abrasives, liquids, powders and other solids. It is the less expensive alloy but not as corrosion resistant as T316. It is the stronger of the two types.
Type 316 is a special stainless alloy due to the addition of 2% molybdenum. This increases its resistance to corrosion by salts, acids and seawater. Also called 18-10 due to 18% chromium and 10% nickel. T316 melts at 2500 degrees F (1375 C) but its maximum recommended temperature for continuous service is 1500 degrees F. (815 C) and is useful for intermediate service up to 1650 degrees F (900 C). Its' uses include: processing of oils and foods, chemicals, and pharmaceuticals.

Welded Stainless Wire Mesh - Examples of Uses

Rodent proofing
Cages (note: We cannot guarantee "cage quality" accuracy of wire alignment.)
Food drying
Reinforcement
Stainless Steel Barbecue Grills (2 inch Mesh .105)
Insulation containment /installation
Soffitt screens
Small gabions
Infill panels (check your local building codes)
Radiator grills
Tractor grills
Marine uses (Type 316 Welded Meshes)
Air vents and inlets
Spark arrestors (2 mesh .063, but we recommend you check local building codes)

Medium weight with one-inch spacing. Cuts with tin snips.